Duo POD EGO 225mm Handboards - Dual Hand Cedar and Walnut Bodysurfing Handplanes
The Duo is two EGO 225mm cedar and walnut handboards, one for each hand. Riding a board on both hands has become a real trend, and it only works with a small board. At 225mm x 200mm, a pair of EGOs gives both hands a planing surface without the boards clashing. Once boards get bigger, they tend to hit each other.
No handboard set comes closer to freestyle bodysurfing than the Duo. Your arms move evenly, as they would in a freestyle body surf, but each one now planes on its own board.
No Flat Surface Anywhere
Pick up either board in the Duo and you'll see it straight away. Neither has a flat surface anywhere. The shape keeps changing from nose to tail and rail to rail, and the thickness changes with it. Each board's deepest measurement sits at a single point, from the top of the palm support to the tip of the keel fin, and falls away in every direction from there. This is not a flat board with barely any shape and a strap on top. It is the POD signature shape, proudly ours since the beginning.
Two Hands, Two Planing Surfaces
Your leading board does the planing out in front. The second board rides on your trailing hand, usually behind your back or up the face, where it does the trailing arm's usual job as ballast and keeps your line balanced. To duck dive, stack one board on top of the other so the top board sits on the strap of the board underneath, then push the pair under the wave together.
For the physics of how a handboard lifts, read The Invisible Cushion - How a Handboard Lifts You.
Cedar and Walnut Construction
Both boards in the set are the same POD signature shape as the EGO, in solid timber. Walnut down the centre carries the strength, and cedar on either side keeps each board light. They go through the same process as every timber board we make: CAD design, CNC shaping, laser engraving and hand finishing. As timber always does, each board's grain comes out differently, so your pair won't be an exact visual match. Both boards have fully rounded rails, nose and tail, so neither leaves a sharp edge when you stack the pair or a board swings on its leash.
Palm Support, Strap System, and Bottom Shape
-
Ergonomic palm support: Each convex deck has a raised palm support that keeps the hand relaxed, so neither hand cramps over a long session with two boards on.
-
Purpose-built strap system: Every board has custom 50 mm retainers and its own 65 mm strap, with a webbing top layer over double-padded neoprene. Each hand gets the same firm, even hold, and the webbing gives the top board something solid to sit on when you stack the pair to duck dive. The neoprene is wider than the webbing and hangs over it on each side, so the webbing edge stays off your skin on both hands. On the narrow 25 mm straps common on handboards, riders tell us that edge is where it digs in.
-
Hand fit: Fit each hand with the thumb outside its strap. The retainers suit most hand widths, and both straps adjust from either side, so you can set left and right separately. The straps fit the hands. The 225 mm board size is what needs to match the rider.
-
Concave and keel fin: Each board has a 16 mm concave and a keel fin, with the strap set towards the tail so both hands ride over their own pivot point.
Duo EGO 225mm Handboard Specifications (Per Handboard)
-
Volume: 485 cm³ / 485 ml / 0.1281 US gallon
-
Planing Lift: From wave speed over each board's planing area and 16 mm concave, with each keel fin holding its line
-
Size: 225 mm (9") x 200 mm x 41 mm full cross-section, palm support to keel fin
-
Weight: 250 to 280 g (varies with timber grain)
-
Deck: Convex with ergonomic palm support
-
Bottom: Deep 16 mm concave with keel fin
-
Strap System: 50 mm POD® retainers, 65 mm double-padded neoprene strap, adjustable webbing
-
Wrist Leash: Adjustable, configurable for both hands
-
Finish: Laser engraving, satin marine finish
Care and Longevity
-
Strap adjustment: Set both straps once, then slip each hand in and out without undoing the Velcro. If either strap wears out, the POD Handboard Replacement Strap Set fits both boards.
-
Protective storage: Store both boards in their foam inside the hemp bag, as shown below.
-
Avoid excess heat: Leaving two timber boards in a hot car puts both boards at risk. Store them out of the heat and out of the sun.
-
Inspect and maintain: Check both boards together after a session, and recoat any worn spots with marine-grade satin.

Turn the Packaging into Padded Board Bags
The foam that protects your Duo boards on the way to you is made to become their storage, so keep it out of the bin. It works on the same idea as the shaped foam in a camera or tool case.
- Lift the boards out and separate the foam halves.
- On each half, cut two straight lines with a box knife, one each side of the board-shaped recess.
- Peel away the foam between the cuts, down to the recess depth.
- Put the halves back together and slide them into the hemp drawstring bag. That creates a letterbox opening at the drawstring end.
- Each board slides in through its slot opening, and the drawstring closes over it.
The hemp bag alone won't protect the boards. With the foam inside, it becomes a padded case, and the packaging stays out of landfill.
A Legacy of Bodysurfing Design
The Duo answers the growing interest in riding a board on each hand. It pairs the smallest board in the 2019 cedar and walnut range, because the EGO is the size where two boards work. POD Bodysurfing Handboards History covers the boards that came before it.
Learn More