POD Handboards - 30 Years of Bodysurfing Design and Development

POD® Handboards Since 1993

With a love for design and a passion for the water, Shane Vassallo spent years researching and developing handboards before introducing them in the late 1980s.

In 1993, POD Handboards Pty Ltd, now known as POD Ware Pty Ltd, was officially established. When conducting market research at the time, the typical reaction was that bodysurfing handboards, hand-planes, or hand-surfers were not popular and would not sell well in stores.

Australia's Oldest Bodysurfing Handboard Brand

Despite that feedback, Shane continued. He manufactured the POD® Handboard's distinctive shape and configuration in a robust, recyclable plastic moulding and continued to hand-finish the classic handcrafted cedarwood model.

It took twenty years, but the feedback was far from correct.

POD® Handboards earned their place on the beach. When people see them for the first time, they are curious and often ask: 'What is that thing? I cannot believe you can bodysurf across a wave!' or 'Which way do you strap it on?'

POD Handboard History (1988-2019) Overview

EVA thong. Over time, he experimented with various materials, shapes, and sizes. Recycled surfboard cores and fins were a quick way to test ideas. Once he found the right shape, he took his time shaping boards in Western Red Cedar and Australian Cedar. When he could no longer keep up with orders, he invested in his first steel mould, which he uses to produce the classic solid plastic board range to this day.

First Fibreglass Handboard - Circa 1988

Shane built the first prototypes from recycled surfboard cores and fins. He tested shape after shape until one held up consistently in bodysurfing conditions. Fibreglass was not a healthy option; shaping and glassing left shin rashes, which led him to start working in wood.

The original POD fibreglass handboard showing front and back views, with a black leather hand strap secured by screws on the front and a single keel fin on the concave underside.

Handcrafted Cedar Handboards - Circa 1990

Wood is a pleasure to shape. Cedar is easy to work with and responds well to sanding. It seals much more easily with a marine-grade finish than fibreglass, and without the health risks. Shane also handmade a Silky Oak fin rebated into the board's concave bottom.

POD cedar handboard showing front and back views, with a black nylon POD strap secured by screws on the front and a single keel fin routed into the polished timber underside.

In 1994, Australian TV host Tim Bailey interviewed Shane Vassallo on Network Ten about his cedar POD handboards.

A Different Shape Direction - Circa 1991

This shape was longer and broader than previous boards, with an interesting tail section. However, there was significant water dispersion toward the face. This board included a handmade Jarrah fin made from recycled floorboards, rebated into the board's concave bottom.

Early POD cedar handboard showing front and back views, with a black nylon POD strap on the front and a deep single keel fin hand-routed into the timber underside.

Handboard Shape Refined with Fin - Circa 1994

The refined, distinctive shape and configuration proved to be the right direction. Shane realised the current keel fin provides better direction and control than a surfboard fin. He also tested a board without the keel fin; it did not have the same lift, direction, or control. The 3/4 keel fin has been shaped into every board since.

POD cedar handboard showing front and back views, with visible timber grain, screw holes from the hand strap fitting on the front, and a single keel fin routed into the underside.

Signature Shape - Cherry Wood and American Walnut Handboard - Circa 1994

With a love of wood species and their different grain characteristics, densities, and colours, Shane made a limited range, all individually named and numbered. Cherry wood to the left and American Walnut to the right.

POD handboards in cherry wood and American walnut showing the concave palm side of each board with black nylon POD strap and metal hardware, displaying the contrasting timber grain of each species.

Paduk and Silver Ash and Zebrano Wooden Bodysurfing Handboard - Circa 1994

The Paduk and Silver Ash is the only board ever made, and it was also the first to be laminated. The Zebrano board, also known as Zebrawood, features impressive zebra stripes. Only four were made.

POD handboards in paduk with silver ash stripe and zebrano wood showing the concave palm side of each board with black nylon POD strap and metal hardware, displaying the contrasting timber grain and stripe inlay of each species.

Zebrawood is Shane's favourite timber species. The zebra-stripe grain led him to handcraft an entry table and drawer in Zebrawood - 1400mm length x 400mm width x 850mm height.

Zebrawood entry table handmade by Shane Vassallo of PODware Pty Ltd, showing the distinctive dark timber grain and clean joinery of the hand-crafted furniture piece.

First Full Length Keel Fin Bodysurfing Handboard - Circa 1994

Testing a full-length keel fin versus a 3/4 length keel fin. The 3/4 length is still shaped the same way it is today. The board on the left has no keel fin; when tested, it provided a very different bodysurfing experience.

POD cedar handboards showing front and back views with POD canvas carry bags on a dark timber surface, with the black nylon strap and single keel fin visible on each board.

First Signature Model - Solid Plastic Bodysurfing POD Handboard with 3/4 Keel Fin - Circa 1995

The demand from the Australian bodysurfing community led Shane to the bank for a loan to build his first steel mould. With support from his mother, Naomi, and his father, Sam, they mortgaged the family home. That investment has held since 1995; the classic solid plastic board range is still produced from that mould today.

POD polypropylene handboards in blue and orange showing the palm side of the blue board with black Velcro strap and wrist leash, and the wave side of the orange board with keel fin and wrist leash.

POD Handboards - Original Classic Signature Shape Handplane

Hand Body Soul® Cotton Wood Bodysurfing Handboard - Circa 2018

A new direction for POD Ware Pty Ltd. The laminated cottonwood Hand Body Soul® Bodysurfing POD Handboard features a concave deck and a concave bottom, consistent with the original POD handboard geometry.

This model introduced the 316-grade stainless steel 50mm webbing hand-strap bridge design, a significant departure from the 25mm surfboard plug and thin hand strap used across the industry. The bodysurfer can now ride in the traditional long handboard position or the short handboard position by rotating the board 180 degrees and repositioning the 50mm hand strap and wrist strap. A first in bodysurfing.

DIY Build Your Own Body Surfing Hand Plane POD Handboard

Cedar and Walnut Bodysurfing Handboards - Circa 2019

The Hand Body Soul® range expanded into three cedar and walnut sizes: EGO, WOO, and FLO. Each board is CAD-designed, precision CNC-machined, laser-etched, hand-finished, and hand-assembled. The ergonomic palm hold and support system was introduced with this range and is shaped into all three sizes.

EGO POD Handboard - sits in the palm of the hand, just past the fingertips. The smallest board in the range.

POD Ego handboard in cedar and walnut showing a hand strapped into the black nylon POD strap with wrist leash, demonstrating the fit and palm position across the timber surface.

EGO Cedar and Walnut POD Handboard 9 inch

EGO - Length 225mm / 9 inches x Width 200mm / 7.87 inches
Volume - 485cm³ / 485ml / 0.1281 US liquid gallon
Weight - 250 to 280 grams (varies with grain density)

WOO POD Handboard - the mid-size board in the Hand Body Soul® range and the most widely used bodysurfing board in the range.

WOO 12" Wood POD Handboard

WOO - Length 300mm / 12 inches x Width 210mm / 8.25 inches
Volume - 705cm³ / 705ml / 0.1862 US liquid gallon
Weight - 380 to 410 grams (varies with grain density)

FLO POD Handboard - the largest board in the Hand Body Soul® range. Maximum surface area for lift and directional hold in powerful surf.

FLO 15" Wood POD Handboard

FLO - Length 375mm / 15 inches x Width 218mm / 8.25 inches
Volume - 953cm³ / 953ml / 0.2517 US liquid gallon
Weight - 460 to 480 grams (varies with grain density)

Let's Look at the Finer Details of the Cedar and Walnut Handboards

The ergonomic palm hold and support sit between custom-built hand strap retainer inserts compatible with a 50mm webbing strap. Unlike other handplanes that use a 25mm surfboard plug and a thin hand strap, the 50mm system holds the hand securely in place and relieves the arm muscles from the strain flat-deck designs put on the wrist and forearm.

Close-up of the POD Hand Body Soul handboard palm side showing the ergonomic strap slot hardware and Hand Body Soul trademark laser-engraved into the walnut centre stripe between cedar panels.

The Design Timeline - What Happened Between the Ranges

After the classic polypropylene model was established and the orders were flowing, Shane watched the handboard category from the outside for a long time. Brands entered. Most came and went within a season or two. Their shapes offered nothing new; in many cases, the configurations were so similar that the differences were impossible to spot. No design thinking was worth responding to.

There was one exception. One brand stood apart. Brownfish handboards, handcrafted wooden boards, took their own direction. The shapes were genuinely different. Sadly, the founder later said publicly that he could no longer survive alongside mass production in the category. That outcome says more about the market than the boards. That kind of independent thinking deserves acknowledgement regardless of where it sits in the market.

Then came a wave of brands - in Australia and then worldwide - offering configurations that were hard to distinguish from one another. That pattern, rather than discouraging further development, did the opposite. It confirmed that the signature shape created decades earlier still had no meaningful competition. The question became how to apply that geometry properly across three sizes.

The EGO, WOO, and FLO followed the same naming logic as POD itself - three letters, clean and direct. The O ending was not accidental. In Australian vernacular, names are rounded off with O. Shaneo. It's cultural shorthand that carries warmth without trying. And there was logic in the playfulness of three-letter words ending in O, all fitting within the POD family. The naming came from the same instinct as the shape: find what is honest and stay with it.

The WOW followed. Not because of the marketing phrase, but because of the personal reaction after nearly three years of development to finally hold a board in the signature shape, in a material formulated precisely for that geometry, and know that it was exactly right. That is what the name reflects.

For the full story of the materials, the greenwashing context, and why longevity is the honest measure of sustainability in handboard construction, read Truth About "Eco-Friendly" Bodysurfing Handboards.

WOW 13" Polyurethane Bodysurfing Handboard - Released 2025

The WOW 13" did not arrive at its size by chance. The EGO sits at 9 inches, the WOO at 12 inches, and the FLO at 15 inches. Customer feedback and sales data across the cedar walnut range identified the WOO as the most popular board, the size that suited the widest range of riders and conditions. One inch of additional length and scaled width over the WOO increases surface area and volume, meaningfully changing how the board sits in the water and how much lift it generates. That single inch, validated by years of real purchasing data, became the starting point for the WOW.

In timber, gaining that surface area and volume comes with a weight cost. A cedar or walnut board at 13 inches carries more mass than a board at 12 inches. The polyurethane construction resolves that trade-off entirely. At 330 to 350 grams, the WOW is 18% to 28% lighter than the equivalent wood board at the same volume, meaning the additional surface area and volume come without the added weight. More lift. No penalty.

Flex rebound is the third dimension no previous POD handboard has had. The polypropylene classic does not flex under load. The cedar and walnut boards do not flex under load. The WOW polyurethane formulation introduces controlled flex rebound for the first time in the range. The board flexes under the forces of the wave and returns to its original shape. That is a new physical behaviour that earlier technologies and materials simply couldn't deliver, no matter how the board was shaped.

Getting there took nearly three years. Eighteen months to find a manufacturer willing to attempt a polyurethane formulation to specific handboard requirements. Another ten to twelve months to trial and refine the weight, density, and rigidity profile until the compound matched exactly what the signature shape needed. This is a world first in handboard construction: a polyurethane formulation developed specifically for the mechanical demands of bodysurfing.

The WOW name followed the same logic as EGO, WOO, and FLO - three letters, ending in O. But for Shane, the WOW factor was not a marketing phrase. It was the personal response to finally holding a board in the signature shape, in a material formulated precisely for that geometry, knowing that what the earlier technology could not produce had now been made. That is what the name reflects.

For full product details, visit the POD WOW 13" Handboard page.

Off the Shelf - Photos, Covers and Advertising

A small collection from the POD archive. The Gowings Department Store front cover, workshop photographs, the first postcard shoot, and early advertising.

Front Cover of Gowings Summer Journal 1997 - 1998

Shane Shaping a POD Handboard on the Drum Sander

Shane Vassallo sanding a cedar handboard blank on a disc sander in his Sydney workshop in the 1990s, wearing a dust mask and safety glasses during early POD handboard production.

Shane at the Postcard Photo Shoot

Shane Vassallo surrounded by cedar POD handboards arranged in a flower formation during a 1990s POD postcard photoshoot.

First POD Handboards Postcard

Brother Damian with Shane's First Handboards

Damian and Shane Vassallo in 1988 with a row of hand-shaped timber POD handboard blanks laid out on the grass in their backyard, marking the earliest production of what would become the POD handboard range.

Shane at the Workshop

Shane Vassallo in his Sydney workshop in 1988 holding a shaped timber handboard blank, with multiple cedar blanks and finished boards in various colours laid out on the workbench behind him.

First Timber Handboard Advertising - Tracks Magazine 1995

POD Handboards Australia advertisement from Tracks Magazine 1995 showing two cedar handboards with black nylon strap and the tagline The New Experience and The New Bodysurfing Experience.

Wood POD Handboards in a Seed POD

POD cedar handboards nestled inside a split seed pod in a 1990s promotional photograph, illustrating the origin of the POD name and the natural timber materials used in early handboard production.

Still Shaping. Still in the Water.

Over 35 years after the first fibreglass prototype was tested in the surf, the shape, the concave, and the keel fin principle that emerged from that early work still appear in every board made today. The materials have evolved from fibreglass to cedar to polypropylene to cottonwood to cedar walnut to polyurethane, but the underlying geometry has held.

Other brands have entered the handboard category over the years. That is a good thing. Competition sharpens thinking and pushes design forward. POD has no interest in being the only handboard brand. It has always been more interested in being the honest one.

The full POD handboard range, from the classic solid plastic Original Classic through to the Hand Body Soul® cedar walnut boards and the WOW 13" polyurethane, is available at Handboards

POD Bodysurfing Handboards History - Successful 30 Years