POD®

WOO Handboard + PF3 POD Swim Fins + Heel Fin Savers Bundle

0
(1 review) Write a Review
€163.61 - €172.87

Adding to cart… The item has been added
SKU:
WOOPF3PFHS
Weight:
0.90 KGS
Shipping:
Calculated at Checkout
Board Craft:
Precision Machined Cedar & Walnut
Lift Dynamics:
90kg Force - 18mm Deep Concave
Evolution Flippers:
PF3 Asymmetric Blade & Vertical Rails
Security Gear:
Drag-Free "ONE" Webbing Fin Savers
Heel Protection:
Integrated Padded Heel Protectors

The Most Popular Size in the Range. The Most Flex in the Fins.

The POD WOO Cedar Walnut Handboard, PF3 Evolution Swim Fins, and Fin Savers with Heel Protectors pair the most widely used wood handboard in the Hand Body Soul® range with the most flexible fin in the PF Series and a complete ankle retention system. The WOO at 300mm suits a wide range of conditions and riders. The PF3's asymmetric blade centres load over the foot and responds precisely to how the rider moves. The fin savers and heel protectors secure that connection at the ankle and prevent loss in turbulent water. Four products, four specific jobs.

WOO Cedar Walnut Handboard - Hand Body Soul®

The WOO is the most widely used handboard in the Hand Body Soul® range at 300mm (12 inches). The cedar and walnut construction delivers an 18mm concave bottom with integrated keel fin, balancing surface area and control across a wide range of wave sizes and conditions. The 50mm hand strap with 65mm neoprene padding keeps the connection secure and comfortable across longer sessions. The convex deck supports a natural hand position in the palm.

WOO Handboard Specifications

  • Volume: 705cm³ (705ml / 0.1862 US liquid gallon)
  • Lifting force: up to 90kg / 198.4lb
  • Size: L 300mm (12") x W 210mm (8.25") x D 43mm (1.69")
  • Deck: Convex with palm hold and support
  • Bottom: 18mm concave with keel fin

For full product details visit the WOO Cedar Walnut Handboard page.

PF3 Evolution POD Swim Fins

The PF3 Evolution is the longest fin in the POD PF Series and the most flexible. The asymmetric blade centres load over the foot rather than the toe edge, moving with the body more naturally through each kick. Like the PF2, the PF3 carries vertical rails that extend to the blade edge, improving wave hold and keeping the legs from sliding down the wave face. The asymmetric foot pocket follows the natural contour of the foot for a precise connection under load.

The PF3 suits experienced bodysurfers and bodyboarders who want a fin that responds precisely to how they move, particularly in conditions where timing, direction, and wave positioning matter most. Available in sizes SM through L.

For full product details visit the PF3 Evolution POD Swim Fins page.

PF3 Evolution Swim Fin Sizing

For the most accurate fit, use the measurements below or the POD Fit Finder on the PF3 product page.

Step 1 - Foot Length and Width

  • Small/Medium: 7-8 - Length 24 cm, Width 9 cm
  • Medium: 8-9 - Length 25 cm, Width 9.5 cm
  • Medium/Large: 9-10 - Length 26 cm, Width 10 cm
  • Large: 10-11 - Length 27 cm, Width 10.5 cm
  • Measurements are maximum sizes before stretch.
  • Natural rubber stretch allowance up to 5 mm for a snug fit

Step 2 - Ankle Strap Width

  • Small/Medium: 9.5 cm
  • Medium: 10 cm
  • Medium/Large: 10.5 cm
  • Large: 11 cm
  • Measurements are before stretch.
  • Strap stretch allowance of 10-15 mm for a secure, non-slip fit
  • View the PF3 foot and ankle size chart here

POD Fin Savers and Heel Protectors

The POD Swim Fin Savers and Heel Protectors use a single streamlined ONE-Strap webbing connection between the ankle and the rubber fin strap. That single strap reduces the bulk and drag associated with wider webbing systems. Soft neoprene heel pads wrap around the fin strap to prevent chafing, stabilise the heel, and improve retention in surf, shore break, and moving water.

  • ONE-Strap webbing connection - single strap sits flat between ankle and rubber fin strap
  • Reduces bulk and drag at the ankle
  • Neoprene heel pads prevent chafing and stabilise the heel
  • No plastic hardware at connection points
  • POD Registered Design

For full product details visit the POD Swim Fin Savers and Heel Protectors page.

Care - Wood Handboard and Swim Fins

  • Fresh water rinse after every surf
  • Shade dry only to protect timber and rubber
  • Avoid direct heat to prevent warping or cracking
  • Recoat when needed with a marine-grade satin finish to keep the wood sealed

<img class="__mce_add_custom__" style="display: block; margin-left: auto; margin-right: auto;" src="https://cdn11.bigcommerce.com/s

POD fins are manufactured for use within the stated and engraved size range. Using a size more than one size below the specified size alters the intended foot-to-blade ratio and may result in an improper fit or reduced function. Fitting fins to feet larger than the stated size may cause overstretching or overloading, which can compromise the structural integrity of the fin. Such misuse voids warranty coverage. POD rubber fins are made for swimming and are not intended for walking or running. Bending or flexing the blade beyond 35° in any direction may cause tearing or cracking of the blade or sole. Damage resulting from such actions is not covered under warranty. To minimise the risk of damage when moving in shallow water, fins should be used for swimming only. Avoid walking or running forward while wearing fins. Where movement on land or in shallow water is necessary, walking backwards will help prevent undue stress to the blade and foot cavity. This warranty does not affect your rights under the Australian Consumer Law.

1 Review Hide Reviews Show Reviews

  • 0
    5
    amazing work

    Posted by Bili on 6th Feb 2024

    I just wanted to thank you for the beautiful board. My partner was so impressed with it and absolutely loved it for his birthday gift. Honestly, it is the most stunning design out there! You have a true talent and craftsmanship. Thank you for your amazing work!

Related Products

An relatable roduct