Three Board Sizes. One Rash Guard. You Choose the Setup.
The POD Hand Body Soul® Cedar Walnut Handboards and Long Sleeve Rash Guard bring the full wood handboard range together with a rash guard built for extended time in the surf. Choose the EGO (225mm) for technical surf and smaller hands, the WOO (300mm) for a wide range of conditions and riders, or the FLO (375mm) for maximum surface area in powerful surf. The rash guard stays the same across all three - UPF 50+ Lycra with 3mm wear-resistant ripstop panels from elbow to wrist.
EGO 225mm Cedar Walnut Handboard - Hand Body Soul®
- Size: L 225mm (9") x W 200mm (7.87") x D 41mm (1.61")
- Volume: 485cm³ (485ml / 0.1281 US liquid gallon)
- Lifting force: up to 70kg / 154.3lb
- Weight: 250 to 280g (varies with grain density)
- Deck: Convex with palm hold and support
- Bottom: 16mm concave with keel fin
For full product details visit the EGO Cedar Walnut Handboard page.
WOO 300mm Cedar Walnut Handboard - Hand Body Soul®
- Size: L 300mm (12") x W 210mm (8.25") x D 43mm (1.69")
- Volume: 705cm³ (705ml / 0.1862 US liquid gallon)
- Lifting force: up to 90kg / 198.4lb
- Weight: 380 to 410g (varies with grain density)
- Deck: Convex with palm hold and support
- Bottom: 18mm concave with keel fin
For full product details visit the WOO Cedar Walnut Handboard page.
FLO 375mm Cedar Walnut Handboard - Hand Body Soul®
- Size: L 375mm (15") x W 218mm (8.25") x D 45mm (1.77")
- Volume: 953cm³ (953ml / 0.2517 US liquid gallon)
- Lifting force: up to 110kg / 242.5lb
- Weight: 460 to 480g (varies with grain density)
- Deck: Convex with palm hold and support
- Bottom: Deep 20mm concave with keel fin
For full product details visit the FLO Cedar Walnut Handboard page.
POD Long Sleeve Rash Guard - Wear-Resistant Elbow Pads
The POD Long Sleeve Rash Guard uses UPF 50+ high-performance Lycra with a heavyweight flatlock construction. A non-slip rubber waistband sits at the hip and a 10mm board short anchor loop keeps the rash guard in position through movement in the water. The nylon-neoprene pattern fabric sits comfortably against the skin across longer sessions.
The defining feature is the 3mm ripstop padded panels that extend from the elbow to the wrist. Those panels protect against abrasion from the board surface during prone bodyboarding and bodysurfing, reducing wear on the garment and reducing contact pressure on the forearms over time.
Rash Guard Features
- Non-slip rubber waistband and 10mm board short anchor loop
- UPF 50+ quick-dry high-performance Lycra
- 3mm ripstop wear-resistant padded elbows
- Rip-resilient nylon-neoprene pattern fabric
- Heavyweight flatlock stitching
For full product details visit the POD Long Sleeve Rash Guard page.
Rash Guard Sizing
| Size | Chest (cm) | Waist (cm) | Body Length (cm) | Arm Length (cm) |
|---|---|---|---|---|
| Small | 88 | 78 | 52 | 65 |
| Medium | 92 | 80 | 54 | 67 |
| Large | 96 | 84 | 55 | 70 |
| Extra Large | 100 | 88 | 56 | 72 |
View how to measure for the POD Rash Guard here.
Care - Wood Handboard and Rash Guard
- Fresh water rinse after every surf - handboard and rash guard
- Shade dry only to protect timber and fabric
- Avoid direct heat to prevent warping or cracking - never leave in direct sun or a hot vehicle
- Recoat when needed with a marine-grade satin finish to keep the wood sealed
