Cover It Before. Drive It Through with the Asymmetric Blade.
The POD Bodyboard Stretch Covers and PF3 Evolution Swim Fins pair equipment for two different parts of the bodyboarding day. The stretch cover protects the board between sessions - 320gsm recycled knit fabric that guards against scratches and deck wear during transport and storage. The PF3 fins drive the experienced bodyboarder through the wave during the session, with an asymmetric blade that centres load over the foot and responds precisely to how the rider moves. Available in four cover colours and sizes SM through L.
POD Bodyboard Stretch Covers
The POD Bodyboard Stretch Cover is made from 320 grams per square metre of recycled stretch knit fabric. The tight-knit construction protects the board surface from scratches and everyday deck wear during transport and storage. A drawstring with a barrel lock secures the opening and a protective panel reinforces the closure point.
The cover fits bodyboards up to 1.12m / 44 inches in length, and stretches to accommodate various board widths. A soft-lined internal accessories pocket protects phones and small valuables from scratches.
The POD® brand mark appears on the inside of the cover rather than the outside - a deliberate choice to avoid any conflict of interest with the bodyboarder's preferred board brand.
Available in Lime, Orange, POD Blue, and Yellow.
For full product details visit the POD Bodyboard Stretch Covers page.
PF3 Evolution POD Swim Fins
The PF3 Evolution is the longest fin in the POD PF Series and the most flexible. The asymmetric blade centres load over the foot rather than the toe edge, moving with the body more naturally through each kick. Like the PF2, the PF3 carries vertical rails that extend to the blade edge, improving wave hold and keeping the legs from sliding down the wave face. The asymmetric foot pocket follows the natural contour of the foot for a precise connection under load.
The PF3 suits experienced bodysurfers, bodyboarders, and ocean photographers who want a fin that responds precisely to how they move. Available in sizes SM through L.
For full product details visit the PF3 Evolution POD Swim Fins page.
PF3 Evolution Swim Fin Sizing
For the most accurate fit, use the measurements below or the POD Fit Finder on the PF3 product page.
Step 1 - Foot Length and Width
- Small/Medium: 7-8 - Length 24 cm, Width 9 cm
- Medium: 8-9 - Length 25 cm, Width 9.5 cm
- Medium/Large: 9-10 - Length 26 cm, Width 10 cm
- Large: 10-11 - Length 27 cm, Width 10.5 cm
- Measurements are maximum sizes before stretch.
- Natural rubber stretch allowance up to 5 mm for a snug fit
Step 2 - Ankle Strap Width
- Small/Medium: 9.5 cm
- Medium: 10 cm
- Medium/Large: 10.5 cm
- Large: 11 cm
- Measurements are before stretch.
- Strap stretch allowance of 10-15 mm for a secure, non-slip fit
- View the PF3 foot and ankle size chart here
