POD®

EGO Wood POD Handboard PF3s Savers - Finest Bodysurfing Gear

0
(No reviews yet) Write a Review
$255.00 - $270.00

Adding to cart… The item has been added
SKU:
PHB1EGOPF3
Weight:
0.85 KGS
Shipping:
Calculated at Checkout

Best Bodysurfing Gear Swim Fins Package - "EGO" Cedar and Walnut Wood POD® Handboards and POD Fins PF3 - Swim Fins

There’s nothing quite like our beautifully crafted POD handboards shapes, our 225mm/9inch solid Cedar and Walnut Hand Body Soul® bodysurfing handplanes are crafted like no other.

EGO POD Handboard perfectly fits in the palm of your hand and in some cases just past your figure tips.

The EGO was not only intended for single use, but also purposely designed to bodysurf with one on either hand, increasing your lifting force, balance and double your swimming stroke, the little Ego is sure to boost any body surfer’s self-confidence.

The new POD handboard range, we now offer all three size body surfing hand boards in two laminated wood species cedar sides and walnut centre 100% Custom Built for Bodysurfing.

Also, for the very first time, Shane has designed ergonomic palm hold and support on the handboard deck surface, between the new purposely custom-built 50mm/2inch hand strap retainer inserts to suit 50mm/2inch webbing strap.

Not like other bodysurfing handplanes use of a small 25mm/1inch surfboard plug and a thin handboard strap causing discomfort over the hand.

The palm support relieves the arm muscles from stress, typically from handplanes with flat decks and most of all holds your hand in place, prevents your hand from slipping out from under the double padded neoprene strap.

EGO Body Surfing Handboard Features:

  • Volume = 485cm^3 or 485millilitres/0.1281 US Liquid gallon
  • Lifting Force = up to 70kg/154.324lb
  • Size = L 225mm/9inch x W 200mm/7.87inches x D 41mm/1.61inches
  • Deck = Convex with Palm Hold and Support
  • Bottom = Deep 16mm Concave with Keel Fin
  • 50mm/2inch Custom POD Designed Hand Strap Retainer (not a 25mm/1inch surfboard plug)
  • 65mm/2.5inches Double Padded Neoprene (not 35mm/1.3inches strap)
  • 50mm/2inch Adjustable Webbing Hand Strap
  • Wrist Leash
  • Laser Engravings
  • Satin Finish

*Note: We highly recommend adjusting the hand strap snug once over your hand. With further use just slide your hand in between the strap and the deck palm support. This will ensure the Velcro remains attached and lasts for many years.

Protective Handboard Case and Hemp Drawstring Cover

Protect your bodysurfing POD handboard investment with a new environmentally friendly reusable packaging foam that can be repeatedly recycled, the environmental protection industry describes it as a never-recession material with so many advantages, including good impact resistance, moisture-proof and waterproof.

Therefore, with the proper care, your premium wood handboard will last years of quality bodysurfing, that you can then pass down from generation to generation.

Hemp Cover and Protective Case Features

  • Environmentally Friendly 320gsm Hemp Cover
  • Impact Resistance Protective Case
  • Reusable Packaging

All POD handboards decks are Convex = Comfort in the palm of your hand

The bottom surface are  Concave = Optimum Lift, Speed, and Control in the surf

The concave bottom and keel fin surface area are explicitly engineered for Rapid Lift versus Force in association with the mixture of air and water provides instant Lifting Force, Speed and Control; this will assist in your body surfing and handboarding wave-holding skills without your board sliding sideways.

Bodysurfing Swim Fins - POD Fins PF3

Introducing our top-of-the-line surfing swim fin proudly designed by our POD Ware team!

Others may try to imitate but none will even come close to the research and development that has gone into the PF3 Evolution Line.

This distinctive swimming fin has all the high quality design features of our PF2’s but stands out because of its asymmetrical design which delivers more precise balance when compared with competitors asymmetrical fins.

These performance fins are sought after by experienced bodysurfers, bodyboarders and surf photographers. Our Point of Difference (POD) philosophy is what makes the difference in this leading edge surfing swim fin!

POD Fins PF3 - Bodysurfing Swim Fins Features

  • Asymmetrical design delivers precision balance
  • Foot size relative to blade length ratio
  • Manufactured with Malaysian highest quality natural buoyant rubber compounds
  • Lightweight
  • POD patented lamination technique for super strong construction
  • Soft rubber lined extended foot pocket is extremely comfortable
  • Unique Splay Rails® combined with asymmetric blade provide excellent balance and a more powerful kick with directed thrust, speed and control
  • Vertical rails produce greater wave holding stability
  • Drainage design ensures quick water and sand release from the foot pocket

POD Fins PF3 - Bodysurfing Fins Sizes

  • Small/Medium: 7-8 = Length 24cm and Width 9cm
  • Medium: 8-9 = Length 25cm and Width 9.5cm
  • Medium/Large: 9-10 = Length 26cm and Width 10cm
  • Large: 10-11 = Length 27cm and Width 10.5cm

POD Heel Protectors and Swim Fin Savers

Introducing our top-of-the-line POD Swim Fins Savers and Heel Protectors, unlike any other product on the market.

Our unique design has "ONE" webbing strap connection between the padded ankle strap and the padded rubber swim fin strap, intentionally constructed to reduce any cumbersome drag when swimming, with no plastic parts in your way.

Quick and easy fitting, once you have wrapped the padded neoprene around the fin straps they are there to last the distance, offering peace of mind your swim fin/flipper investment is not going to be lost in the surf.

Fin and Heel Savers registered design provides you with all the comfort around your ankle preventing the rubber fin strap chafing your ankles or heels.

Fin Savers and Heel Protectors Features

  • Unique "ONE" strap connection
  • Padded fin strap will retro fit most brand swim fins
  • Quick and easy fitting
  • Peace of mind in the surf
  • Registered Design

*Note: Please use the foot size chart below for all models of POD fins. If you have any doubts whatsoever, please visit your local stockist.

If the length of your foot is slightly longer but matches the same width in the foot size chart, there is still plenty of toe room because the foot pocket itself has been extended for versatile fittings and to ensure a comfortable fit.

POD Fins are not engineered for fittings below the mentioned sizes (more than one foot sizes), this will alter the intended foot size to blade length ratio versus body weight.

This will compromise the swim fin structural strength, due to overweight or overstretching, is not covered under warranty.

Furthermore, POD swim fins are made from quality natural rubber intended for bodyboarding, bodysurfing, knee boarding, swimming and other related water sports activities, including ocean photographers.

They are not intended for walking or running (they are not joggers nor shoes).

A common sense approach that is highly recommend, walking and/or running backwards will not compromise the swim fin structure

Bending the blade beyond 35° in any direction from walking, running and/or excess load on the blade or sole will cause the sole or blade to tear/crack voids warranty.

Please review in the left hand side product images - the blade length comparison between the PF2's and PF3's this extra blade length will scale the same in all size POD swim fins.

POD Handboard Tips are available on the following link, www.podware.com.au/handboard-tips.

POD Fins are not engineered for fittings below the mentioned sizes (more than one foot sizes), this will alter the predetermined foot size to blade length ratio versus body weight. This will compromise the swim fin structural strength, due to overweight or overstretching, is not covered under warranty. They are not intended for walking or running (they are not joggers nor shoes). Bending the blade beyond 35° in any direction from walking, running and/or excess load on the blade or sole will cause the sole or blade to tear/crack voids warranty. Walking and/or running backwards will prevent the above occurring.

Related Products

An relatable roduct