Cover It Before the Session. Drive Through the Wave with the Asymmetric Blade.
The POD Bodyboard Stretch Covers and PF3 Evolution Swim Fins pair equipment for two different parts of the bodyboarding day. The stretch cover protects the board between sessions. Its 320gsm recycled knit fabric guards against scratches and deck wear during transport and storage. In the water, the PF3's asymmetric blade centres load over the foot, extending the drive from your kick and responding precisely to how you move. Available in four cover colours and four fin sizes, SM to L.
POD Bodyboard Stretch Covers
Slide your board in, pull the drawstring and lock it off with the barrel lock. A reinforced panel sits across the closure point, where the cover takes the most strain each time you pull it tight. The cover takes boards up to 1.12m / 44 inches long and stretches to fit a range of widths.
The fabric is a tight recycled stretch knit at 320 grams per square metre. It keeps your deck and rails clear of the scratches and scuffs that come with car roofs, boot floors and garage walls. Keys and your phone go in the soft-lined pocket inside, where nothing scratches them.
You'll find the POD® mark on the inside, not the outside. We put it there on purpose, so your cover never competes with the brand on your board.
Choose from Lime, Orange, POD Blue and Yellow.
For full product details visit the POD Bodyboard Stretch Covers page.
PF3 Evolution POD Swim Fins
Kick hard in a stiff fin, and you can feel the blade resisting your leg. The PF3 goes the other way. It's the longest and most flexible fin in the PF Series, and it gives with your leg through the full length of the stroke. Its asymmetric blade holds the pressure under the middle of your foot, not out at the toe edge, so the flex runs in the same direction your leg is moving.
The pocket takes the same approach. Cut asymmetrically to the true contour of a foot, it keeps you locked in when you push off the bottom or kick hard to make a section.
Lying prone across the face, your legs rely on the vertical rails. As on the PF2, they extend right to the blade edge, grip the wave and stop your legs from dragging towards the trough.
Bodyboarders who want every small leg move to show up in the water choose the PF3. Available in four sizes, SM to L.
For full product details visit the PF3 Evolution POD Swim Fins page.
PF3 Evolution Swim Fin Sizing
For the most accurate fit, use the measurements below or the POD Fit Finder on the PF3 product page.
Step 1 - Foot Length and Width
-
Small/Medium: 7-8 - Length 24 cm, Width 9 cm
-
Medium: 8-9 - Length 25 cm, Width 9.5 cm
-
Medium/Large: 9-10 - Length 26 cm, Width 10 cm
-
Large: 10-11 - Length 27 cm, Width 10.5 cm
- Measurements are maximum sizes before stretch.
- Natural rubber stretch allowance up to 5 mm for a snug fit
Step 2 - Ankle Strap Width
-
Small/Medium: 9.5 cm
-
Medium: 10 cm
-
Medium/Large: 10.5 cm
-
Large: 11 cm
- Measurements are before stretch.
- Strap stretch allowance of 10-15 mm for a secure, non-slip fit
- View the PF3 foot and ankle size chart here
