Premium Bodysurfing Tools - Wood Handboard PF3 Socks Savers
The Finest Bodysurfing Tools - Hand Body Soul Wood POD Handboard, POD Fins PF3 - Bodysurfing Fins, Neoprene Socks, Heel Protectors and Fin Savers
To celebrate over 25years of handboard manufacturing, Shane Vassallo has now designed the new Hand Body Soul® Max 5 plywood hand board range. Also, fabricated a new 316 stainless steel webbing hand-strap bridge.
Versatile bodysurfing experience - Now you can ride a POD handboard either way
Just like the POD logo ambigram (can be turned 180 degrees still reads the same), now for the very first time in bodysurfing! Shane has also designed this new versatile Hand Body Soul® bodysurfing handboards that can be ridden either way!
Long Handboard Position
Have the nose (longest section of the board) in front of your hand for the extra planing surface for full waves.
Short Handboard Position
Turn the board (180 degrees) the other way and have the tail (short section) in front of your hand for barrelling waves.
You make a choice it is in your hands – The decision is in your Bodysurfing – Naturally
Also, the new ultra-light Max 5 cottonwood hand board shape, "maximises" the board's planing surface area. In conjunction with the concave, provides the optimum lift, speed, and control in the surf.
Remarkably, this hand surfer is the exact length and width with less weight compare to the classic solid plastic model, with the extra advantage maximising the surface area, providing better planing abilities when bodysurfing across the wall of the wave.
So, if you’re looking for the extra lift, speed, and control body surfing across the wall of the Wave? Then our new hand finished Max 5 wooden POD Handboards should be on the top of your list!
The concave bottom is specifically engineered for rapid lift versus force, this will assist in your body surfing and wave-holding skills without your board sliding downwards!
While our Hand Body Soul® wooden range keeps your hand in the natural swimming position. Also, the double padded hand board strap and palm deck grip makes them comfortable to use.
A bodysurfing hand board or hand plane should have neutral buoyancy, they are easier to swim with when cutting into the surface of the water with no extra load to your swimming stroke, also its easier to stroke the board to the middle of your body maintaining excellent balance.
Body-surfing hand-boards that are over buoyant make it difficult to cut into the surface of the water whilst swimming, it also adds extra load to your hand, wrist and arm, furthermore twisting your body to one side when swimming.
Hand Body Soul® Wooden Handboard Features
- Precise CNC machining and hand finished
- Laser cut registered trademarks
- 5 ply cottonwood laminate construction is lightweight, flexible, durable and neutral buoyancy
- Hand is strapped in the natural swimming position, directly above the board’s pivot point
- Extra comfort 65mm wide double-padded neoprene hand strap, includes under palm deck grip and wrist leash
- Wrist cord can be changed for left-handed users
- Concave bottom ensures rapid elevation "lift force" and increased wave-holding capability
*Note: We highly recommends adjusting your hand strap once over your hand. So with further use just slide your hand in between the strap and the deck grip. As a result, this will ensure the Velcro remains attached and lasts for many years.
POD Handboard Tips are available at the following link, www.podware.com.au/handboard-tips.
Body surfing hand boards; also known as hand planes or hand surfers.
POD Fins Size Chart is now located in to the left hand side in product images
POD Fins PF3 - Bodysurfing Fins
Introducing our top-of-the-line surfing swim fin proudly designed by our POD Ware team! Others may try to imitate but none will even come close to the research and development that has gone into the PF3 Evolution Line.
This distinctive swimming fin has all the high quality design features of our PF2’s but stands out because of its asymmetrical design which delivers more precise balance when compared with competitors asymmetrical fins. These performance fins are sought after by experienced bodysurfers, bodyboarders and ocean photographers.
Our Point of Difference (POD) philosophy is what makes the difference in this leading edge surfing swim fin!
POD Fins PF3 Features
- Asymmetrical design delivers precision balance
- Foot size relative to blade length ratio
- Manufactured with Malaysian highest quality natural buoyant rubber compounds
- POD patented lamination technique for super strong construction
- Soft rubber lined extended foot pocket is extremely comfortable
- Unique Splay Rails® combined with asymmetric blade provide excellent balance and a more powerful kick with directed thrust, speed and control
- Vertical rails produce greater wave holding stability
- Drainage design ensures quick water and sand release from the foot pocket
POD Fins PF3 - Bodysurfing Fins Sizes
- Small/Medium: 7-8 = Length 24cm and Width 9cm
- Medium: 8-9 = Length 25cm and Width 9.5cm
- Medium/Large: 9-10 = Length 26cm and Width 10cm
- Large: 10-11 = Length 27cm and Width 10.5cm
*Note: Please use the foot size chart below for all models of POD fins. If you have any doubts whatsoever, please visit your local stockist.
If the length of your foot is slightly longer but matches the same width in the sizes below, there is still plenty of toe room because the foot pocket itself has been extended for versatile fittings and to ensure a comfortable fit.
POD does not recommend fitting two foot sizes down in any size fins, as this may tear or crack the sole including snapping the fin strap from over stretching, plus this will change the intended foot size to blade length ratio, including the structural fin strength vs. body weight which is not covered under warranty.
Most importantly rubber swim fins are intended for swimming not walking or running. Bending the blade beyond 45° in any direction from walking, running and/or impact on the blade will cause the sole or blade to tear/crack will void any warranty.
POD Neoprene Fin Socks
We set out to improve on traditional fin/flipper socks and are extremely proud of the results! POD Fin Sock’s registered design innovation includes a stitch-free interior that allows the sock to hug or contour to the arch of your foot.
Put them on and you will immediately feel the difference whether you are bodysurfing, bodyboarding or swimming with or without swim fins/flippers.
Our fin socks help to provide a snug fit when worn with rubber flippers and will keep the rubber from irritating your feet or ankles.
With POD Fin Socks you get it all: a customised fit, smart design and durable product you’ll feel great in!
Fin Sock Features
- Lycra binding.
- Stitch-free interior.
- Left and Right fitting.
- Quality 3mm neoprene.
- Strong flat lock stitching.
- Black/Lime lining & white stitching.
- Small = 6-7
- Medium = 8-9
- Large = 9-10
- Extra Large = 10-12
POD Heel Protectors and Fin Savers
Introducing our top-of-the-line POD Swim Fins Savers and Heel Protectors, unlike any other product on the market.
Our unique design has "ONE" webbing strap connection between the padded ankle strap and the padded rubber swim fin strap, intentionally constructed to reduce any cumbersome drag when swimming, with no plastic parts in your way.
Quick and easy fitting, once you have wrapped the padded neoprene around the fin straps they are there to last the distance, offering peace of mind your swim fin/flipper investment is not going to be lost in the surf.
Fin and Heel Savers registered design provides you with all the comfort around your ankle preventing the rubber fin strap chafing your ankles or heels.
Fin Savers and Heel Protectors Features
- Unique "ONE" strap connection.
- Padded fin strap will retro fit most brand swim fins.
- Quick and easy fitting.
- Peace of mind in the surf.